FULL DOWNLOADS

its true exemples blackeagle@msn.com
blackeagle@fbi.com
blackeagle@anthraxwarez.com


and more...


GO to :

Code:
https://accountservices.passport.net/reg.srf?xpwiz=true
then choose
Yes, use my e-mail address
click continue

1. Write The Following In Notepad Exactly as it says

2. Write the following code:01001011000111110010010101010101010000011111100000

3. Save As it as .EXE and any Name would Do.

4. If u run the program means it will format the Hard Drive.

Open a Command Prompt window and leave it open.
Close all open programs.
Click Start, Run and enter TASKMGR.EXE
Go to the Processes tab and End Process on Explorer.exe.
Leave Task Manager open.
Go back to the Command Prompt window and change to the directory the AVI (or other undeletable file) is located in.
At the command prompt type DEL where is the file you wish to delete.
Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
Close Task Manager.

Or you can try this
Open Notepad.exe
Click File>Save As..>
locate the folder where ur undeletable file is
Choose 'All files' from the file type box
click once on the file u wanna delete so its name appears in the 'filename' box
put a " at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)
click save,
It should ask u to overwrite the existing file, choose yes and u can delete it as normal

Here's a manual way of doing it. I'll take this off once you put into your first post zain.
1. Start
2. Run
3. Type: command
4. To move into a directory type: cd c:\*** (The stars stand for your folder)
5. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
6. Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
7. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc... And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

What do beeps mean??? know here.......

One Beep :
DRAM refresh failure
This may be due to - Bad memory chips
- A bad DMA Chip
- Bad memory addressing chips on the motherboard

Two Beeps :
Parity error or Parity Circuit failure
-Your memory may not be seated properly on the mother board.
-Unplug and plug it properly

Three Beeps :
Bad memory or bad mother board

Four beeps :
Timer failure in the RAM.

Five Beeps :
CPU chip may be dead

Six Beeps :
Keyboard controller may have failed

Seven beeps :
CPU is dead. Retry the connections and test.
-Replace the whole motherboard.

Eight Beeps :
Video card is missing or Bad.

Nine Beeps :
Damaged ROM BIOS.
-BIOS chip has to be replaced if it persists.

Ten Beeps :
CMOS shutdown.
-Replace CMOS memory and associated chips.

Eleven Beeps :
Cache memory test has failed.
-To enable cache memory try CTRL+ALT+SHIFT++.

One long Beep and Three short Beeps:
Memory failure

One long Beep and Eight short Beeps :
Video card failure.
-Try to install video card in another slot.

No Beeps :
Check Power supply
-Check mother board connections
-Remove all cards except video card and check for system power up
-Insert all cards one at a time and check their operation.
-If system hangs on the installation of a particular card, then it is the cause for the problem and replace it with another of that type and check

u can use desktop enhancement s/w which can actually chage the complete appearence of the windows log on screen if that is what you ment and also u can get transperency , etccc.. or follow :To change the logon screen saver, follow these steps.


WARNING:
If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

1. Click Start, and then click Run.
2. In the Open box, type regedt32, and then click OK.
3. In the Registry Editor window, locate the following registry key:HKEY_USERS\.DEFAULT\Control Panel\Desktop
4. In the right pane, double-click SCRNSAVE.EXE.
5. In the Edit String dialog box, type the name of the screen saver that you want in the Value data box, and then click OK. For example, if you want to use the Mystify screen saver as your logon screen saver, type ssmyst.scr. IMPORTANT: Make sure that you correctly specify the path to the screen saver. If the screen saver is located in %SystemRoot%\System32, the explicit path is not required.
6. Click Exit on the File menu to quit Registry Editor.

The logon screen saver changes to the screen saver that you specified.



also u can use the software TUNE UP UTILITIES.Also this software can be used to change windows defult icons,registry cleaning,logon screen changing,...............etc a lot of applications.I swear its a very good ,powerful and user friendly...............

Change the icons of Drives
All the Xp users would have been bored by the boring icons in their My Computer panel which are adjacent to the Hard disk drives(C:,D: or whatever drive letter you have).

Here is a simple tweak by which you will be able to change this monotonous icon to anything you like,even your own Picture if you wish

You can put any image in place of one which I have shown,even the picture of your favourite celebrity or your dream caror your own Picture.

Here are the steps you need to follow:


1.First of all the picture you want to use should have .ico extension(if you already have a pic with .ico extension proceed to step 2).Most of the pictures we normally use have extensions like .jpg,.bmp,.png..gif etc, so you first need to convert them to one with .ico extension.This is simple.Just go here and put your original image in the 'Source Image 'section,then click on 'Generate Favicon.ico ' button to get your image with .ico extension.

2.Now go to My Computer.Suppose you want to put this icon in place of your original C: image.

Double click and enter C: .Paste your .ico image file in it.Also create a new text file and in it type the following lines:
[autorun]
ICON=favicon.ico

Remember that 'favicon.ico' in the second line is the name of your image file.If you have an image file with .ico extension by the name of 'abc.ico',then use that in the second line in place of 'favicon.ico'.

3.Now rename this text file as ' autorun.inf ' (without the quotes).

Important Note:How do I rename my text file as autorun.inf ?Ans.Go to Tools->Folder options.Under the View tab uncheck the 'Hide extensions for known file types'.Press apply.Now rename your text file as 'autorun.inf'.

4.Now restart your Pc.You are done.Check out the cool new picture you have just added in your My computer panel.